Econoline E150 1/2 Ton V6-4.2L VIN 2 (1998)
Crankshaft Main Bearing Seal: Service and Repair
REMOVAL
1. Remove the transmission.
2. Remove the flywheel.
3. Use (A) Rear Crankshaft Seal Remover and Impact Slide Hammer to remove the (B) crankshaft rear oil seal.
INSTALLATION
1. Use (A) Rear Main Seal Replacer to install the (B) crankshaft rear oil seal.
NOTE: Lubricate the crankshaft rear oil seal lips with engine oil prior to installation.
