ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A/C Hose/Line|Page 7674 > < Hose/Line HVAC|Specifications|Page 7671
Page 1
background image

Hose/Line HVAC: Service and Repair
A/C Hose/Line

Auxiliary A/C-Heater System

REMOVAL

1. Using proper procedures, recover the refrigerant.
2. Disconnect the battery ground cable.
3. Partially drain the engine cooling system.
4. Remove the engine air cleaner (ACL) and the air cleaner outlet tube.

5. Move the compressor discharge line isolator.

1. Remove the screw.
2. Move the compressor discharge line isolator.

6. Disconnect the condenser core refrigerant lines. 

1. Disconnect the compressor discharge line.
2. Disconnect the condenser to evaporator tube.

CAUTION:  Use a wrench on each side of the fitting to prevent damage to the A/C fitting.

A/C Hose/Line|Page 7674 > < Hose/Line HVAC|Specifications|Page 7671