Econoline E150 1/2 Ton V6-4.2L VIN 2 (1998)
8. Install the four clamps.
1. Install the clamp.
2. Install the screw.
9. Install the condenser to evaporator tube.
Auxiliary A/C-Heater System
REMOVAL
1. Using proper procedures, recover the refrigerant.
2. Disconnect the battery ground cable.
3. Partially drain the engine cooling system.
4. Remove the engine air cleaner (ACL) and the air cleaner outlet tube.
5. Move the compressor discharge line isolator.
1. Remove the screw.
2. Move the compressor discharge line isolator.