Econoline E150 1/2 Ton V6-4.2L VIN 2 (1998)
5. When completed, the safety belt should look like the illustration.
Safety Belt Twisted at Safety Belt Guide
NOTE: These procedures apply to both wire-formed and stamped D-ring designs.
1. Grasp the belt webbing at the shoulder belt guide (D-ring).
2. Rotate and fold the belt webbing over itself to remove the twist.
3. Feed the folded portion of the belt through the safety belt guide (D-ring).
4. When completed, the safety belt should look like the illustration.
Seat Belt With Anchor Plate Thread Damage
1. Remove the broken or stripped bolt and discard.
