Econoline E150 1/2 Ton V6-4.2L VIN 2 (1998)
2. Install the clutch piston seals.
1. Install the intermediate clutch piston outer seal.
2. Install the intermediate clutch piston inner seal.
3. Install the (A) intermediate clutch piston into (B) Clutch Lip Seal Protector.
NOTE: Coat the intermediate clutch piston outer seal, intermediate clutch piston inner seal and pump body sealing area with petroleum jelly.
4. Install the intermediate clutch piston.
1. Position the intermediate clutch piston and Clutch Lip Seal Protector onto the pump body.
2. Push the intermediate clutch piston to the bottom of the pump body bore, exerting even pressure.
5. Locate the piston bleed hole.
CAUTION: The piston bleed hole must be located at 12 o'clock position (towards the top of the transmission). Shift problems may occur if
installed incorrectly.
