Econoline E150 1/2 Ton V8-4.6L SOHC VIN 6 (1999)
Alignment: Service and Repair
Toe
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the "straight forward" position by attaching a rigid link from the steering wheel to the brake
pedal.
3. Check the toe settings.
4. Loosen the nuts.
-
Clean and lubricate the steering linkage and tie rod end threads.
5. Rotate the adjusting sleeves to obtain the correct toe setting.
6. Tighten the nuts. Position the RH adjusting sleeve clamp opening downward within 45 degrees of vertical.
