Econoline E150 1/2 Ton V8-4.6L SOHC VIN 6 (1999)
7. Remove the torque converter drain plug and drain the torque converter.
^
Rotate the crankshaft to access the drain plug.
8. Clean and inspect the (A) transmission fluid pan. the (B) transmission pan gasket and the (C) magnet.
9. Flush the cooler, and cooler lines.
10. Flush the torque converter.
Installation
1. NOTE: A new torque converter drain plug must be installed.
Install the new torque converter drain plug.
2. Install the converter housing access plug.
3. CAUTION: If replacing the filter, and the seal remains in the main control bore, carefully use a small screwdriver to remove the seal. Use care
