Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
Engine Temperature Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the air cleaner and bracket assembly. For additional information, refer to Fuel Delivery and Air Induction.
3. Rotate the drive belt tensioner clockwise and remove the drive belt from the generator pulley.
4. Remove the bolts retaining the upper intake plenum to the generator mounting bracket.
5. Remove the lower mounting bolts and position the generator aside.
6. Disconnect the Intake Manifold-Tuning Valve (IMTV) connector.
