Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
NOTE: The bolts are part of the valve cover and should not be removed.
Remove the LH valve cover.
^
Fully loosen the bolts and remove the valve cover.
^
Inspect the valve cover gasket and clean the mating surface of the cylinder head.
Installation
All engines
1. NOTE: If not secured within four minutes, sealant must be removed and the sealing area cleaned with metal surface cleaner. Allow to dry until
there is no sign of wetness, or four minutes, whichever is longer. Failure to follow this procedure can cause future oil leakage.
Apply a bead of silicone gasket and sealant in two places where the engine front cover meets the cylinder head.
2. Position the valve cover and the valve cover gasket on the cylinder head, and loosely install the bolts.
Romeo engine (4.6L)