Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
Water Pump: Service and Repair
Removal
1. Drain the cooling system.
2. Remove the fan and fan clutch.
3. Remove the accessory drive belt.
4. Remove the water pump pulley.
1
Remove the bolts.
2
Remove the water pump pulley.
5. Remove the (A) bolts and the (B) water pump from the (C) engine.
Installation
1. NOTE: New water pumps are shipped with a new O-ring in place. Only lubricate if the old pump is to be reinstalled.
Install a new O-ring on the water pump. Coat the new O-ring with Ford Premium Engine Coolant E2FZ-19549-AA or B, in Oregon
F5FZ-19549-CC, in Canada Motorcraft CXC-10 or equivalent meeting Ford specification ESE-M97B44-A.
2. CAUTION: Do not rotate the waterpump housing once installed in the engine. Damage to the O-ring can occur, causing the water pump to leak.
Position the (A) water pump on the (B) engine and install the (C) bolts.