Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
equivalent meeting Ford specification WSH-M1C231-B and install the O-ring seals.
2
Connect the A/C evaporator core fitting.
3
Install the screw.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
4. Connect the condenser core refrigerant lines.
1
Lubricate the new O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C), or
equivalent meeting Ford specification WSH-M1C231-B and install the O-ring seals.
2
Connect the condenser to evaporator tube.
3
Connect the compressor discharge line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
5. Install the engine air cleaner and the air cleaner outlet tube.
6. Reconnect the battery ground cable.
7. Evacuate and charge the A/C system.
