Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
Housing Assembly HVAC: Service and Repair
Removal and Installation
Heater Core Case
REMOVAL
1. Drain the engine cooling system.
2. Disconnect the battery ground cable.
3. Disconnect the quick disconnect heater hose couplings at the heater core, please refer to Heating and Air Conditioning/Heater Hose/Service and
Repair/ See: Heater Hose/Service and Repair
4. Plug the heater water hoses with a suitable 5/8-inch or 3/4-inch plug.
5. Remove the instrument panel. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
6. Remove the heater core housing.
1
Remove the screw.
2
Remove the nuts.
3
Remove the heater core housing.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the coolant hoses with MERPOL(R) meeting Ford specification ESE-M99B144-B or plain water only, if needed.
Main Climate Control
REMOVAL
1. Perform the Refrigerant Discharging and Recovery Procedure, please refer to Heating and Air Conditioning/Service and Repair/ See: Service and
Repair
2. Remove the battery.
