Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
4. Connect the blower motor electrical connector.
5. Install the A/C refrigeration tube assembly.
1
Install the A/C refrigeration tube assembly.
2
Install the screw.
6. Connect the condenser to evaporator tube at the A/C condenser core and A/C evaporator core.
NOTE: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
7. Install the suction accumulator/drier.
8. Realign the battery tray support brackets.
9. Install the windshield reservoir.
10. Install the windshield washer reservoir cover.
1
Install the windshield washer reservoir cover.
2
Install the screws.
11. Install the heater core housing. See: Front/Heater Core Case
12. Fill the engine coolant system.