ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Compressor Cut-Off/Cycling Switch|Page 7532 > < A/C Cycling Switch|Page 7529
Page 1
background image

Refrigerant Pressure Sensor / Switch: Service and Repair
Compressor Cut-Off/Cycling Switch

REMOVAL

1. Remove the battery.

2. Disconnect the A/C cycling switch connector.

3. Remove the A/C cycling switch from the top of the suction accumulator/drier.

INSTALLATION

1. To install, reverse the removal procedure.

^

Lubricate the O-ring seal with PAG oil or equivalent. 

Compressor Cut-Off/Cycling Switch|Page 7532 > < A/C Cycling Switch|Page 7529