ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag System Reconnect Checklist|Page 9154 > < Air Bag System Reconnect Checklist|Page 9152
Page 4
background image

Reactivation

All vehicles

1. Remove the ECS fuse F19 (10A) and F38 (10A) from the CJB.

2. Disconnect the battery ground cable and wait at least one minute.  

Vehicles equipped with a passenger air bag module

3. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.

 

4. Connect the passenger air bag module electrical connector.

 

5. Position the RH lower instrument panel finish panel reinforcement mounting bracket. Install the bolts.

 

6. Position the RH lower instrument panel finish panel reinforcement. Install the bolts.

Air Bag System Reconnect Checklist|Page 9154 > < Air Bag System Reconnect Checklist|Page 9152