Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
6. Disconnect the underbody tube spring lock coupling.
7. Lower the vehicle.
8. Remove the auxiliary A/C refrigeration line.
INSTALLATION
1. Service the new auxiliary A/C refrigeration line with the correct amount of PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA
(Motorcraft YN-12-C), or equivalent meeting Ford specification WSH-M1C231-B. See: Refrigerant Oil Addition.
2. Route the auxiliary A/C refrigeration line.
3. Raise and support the vehicle.
4. Connect the underbody tube spring lock coupling.
5. Lower the vehicle.
6. Connect the compressor suction line.
1
Lubricate the new O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C), or
equivalent meeting Ford specification WSH-M1C231-B and install the O-ring seals.
2
Connect the compressor suction line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.