Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
Disconnect the battery ground cable (14301) and wait at least one minute.
6. NOTE: Make sure the wheels are in the straight-ahead position.
Remove the driver air bag module.
1. Remove the steering wheel back cover plugs.
2. Remove the two driver air bag module bolts (one shown).
3. Disconnect the horn electrical connector.
4. Disconnect the driver air bag module electrical connector.
5. Remove the driver air bag module.
7. Attach the restraint system diagnostic tool to the clockspring electrical connector at the top of the steering column.
Vehicles equipped with a passenger air bag module
8. Pull out to release the retaining clips and remove the RH lower instrument panel finish panel.
9. Remove the bolts. Remove the RH lower instrument panel finish panel reinforcement.
