Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
4. NOTE: Slight turning of the clockspring rotor is allowable for alignment purposes to the steering column.
With the flats of the clockspring aligned to the flats of the steering column, slide the clockspring onto the steering column engaging the retaining
tabs.
5. Press at the six, twelve, and three o'clock positions to seat the clockspring.
6. Rotate the wiring and secure into two wire clips.
7. Connect the clockspring electrical connector.
-
Connect the clockspring electrical connector.
-
Install the pin-type retainer into the bracket.
8. Install the key-in-ignition warning indicator switch.
9. If a new clockspring is used, remove the yellow anti-rotation tab.