Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
Seat Belt Retractor: Service and Repair
Rear Safety Belt and Tongue
Safety Belt Bolt Bit
SPECIAL TOOL(S)
REMOVAL
1. On a rear safety belt retractor and tongue with a flip-up safety belt guide cover, remove the safety belt guide as follows.
1
Lift the safety belt guide cover.
2
Use the Safety Belt Bolt Torx Bit to remove the bolt.
3
Remove the safety belt guide.
2. On a rear safety belt retractor and tongue without a flip-up safety belt guide cover, remove the safety belt guide as follows.
1
Position the shoulder safety belt cover aside.
2
Use the Safety Belt Bolt Torx Bit to remove the bolt.
3
Remove the safety belt guide.
3. On the LH second row rear safety belt retractor and tongue, remove the quarter trim finish panel, the body side rear center lower trim panel and the
quarter trim panel.
4. On the LH third, fourth and fifth row rear safety belt retractor and tongues, remove the quarter trim rear upper panel and the quarter trim rear
lower panel.
5. On the RH rear safety belt retractor and tongue, remove the quarter trim upper panel, the quarter trim lower panel, the quarter trim rear upper
panel and the body side trim cover rear.