Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
6. Remove the safety belt retractor.
1
Remove the safety belt guide.
2
Use the Safety Belt Bolt Torx Bit to remove the bolt.
3
Remove the safety belt retractor.
7. On a rear safety belt retractor and tongue with a detachable safety belt anchor, disengage the detachable safety belt anchor.
1
Insert a key or small screwdriver into the slot in the detachable anchor and lift upward.
2
Disengage the detachable anchor tongue end from the detachable anchor.
8. On a rear safety belt retractor and tongue without a detachable safety belt anchor, remove the safety belt anchor.
1
Use the Safety Belt Bolt Torx Bit to remove the bolt.
2
Remove the safety belt anchor.
INSTALLATION
