Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
6. Remove the bearing retainer.
7. Remove the bearing and the gear.
^
Thoroughly clean all drill shavings from the steering column and inspect it for damage.
8. NOTE: Use a new ignition switch lock cylinder.
To install, reverse the removal procedure.
^
Verify ignition switch lock cylinder operation.
9. WARNING: To avoid the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the
Supplemental Restraint System (SRS) reactivation procedure.
Reactivate the Supplemental Restraint System (SRS).