Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
5. Verify the amount of piston travel on the dial indicator is within specification.
6. If piston travel is not within specification, select and install the correct servo piston assembly to bring the servo piston travel within specification.
1
One groove
2
Two groove
3
Three groove
7. Remove the dial indicator and servo selection tool.
8. Install the correct reverse servo assembly.
1
Install the reverse band servo spring.
2
Install the reverse band servo piston and rod.
3
Install the reverse band servo cover.