Econoline E150 1/2 Ton V8-5.4L CNG VIN M (1998)
4. Disconnect the front brake hose from the disc brake caliper.
1
Remove the flow bolt.
2
Disconnect the front brake hose.
3
Remove and discard the copper washers.
CAUTION: To prevent contamination and reduce air entry, always plug a disconnected front brake hose.
5. Remove the two disc brake caliper bolts.
6. Remove the disc brake caliper from the front wheel spindle.
7. Inspect the disc brake caliper for brake fluid leakage. If the disc brake caliper is leaking, it must be rebuilt or replaced.
INSTALLATION
1. Fill the rubber caliper sleeve boots with Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (Motorcraft WA-10) or an
equivalent silicone compound meeting Ford specification ESE-M1C171-A.
CAUTION: To prevent deterioration of the caliper sleeve boots, do not use petroleum-based lubricant.
