Econoline E150 1/2 Ton V8-5.4L CNG VIN M (1998)
5. Remove the ignition switch lock cylinder.
1. Position the lock cylinder to RUN.
2. Using a suitable tool, push upward on the cylinder release tab through the hole in the lower shroud while pulling the cylinder outward
6. Carefully pry to release the clips and remove the steering column opening cover.
7. Remove the upper steering column shroud.
8. Prevent accidental rotation of the air bag sliding contact.
1. Check to see if the service lock is missing.
2. If the service lock is missing, apply two strips of masking tape across the air bag sliding contact.
NOTE: The air bag sliding contact has a service lock that prevents accidental rotation when the steering wheel is removed.
