ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Automatic Locking Retractor (ALR) Mode|Page 9570 > < Seat Belt|Specifications
Page 1
background image

Seat Belt: Description and Operation
Automatic Locking Retractor (ALR) Mode

NOTE:  The Automatic Locking Retractor (ALR) mode is not available on the driver safety belt. 
 
In the automatic locking retractor (ALR) mode, the shoulder belt is automatically pre-locked. However, the belt will still retract to remove any slack in
the shoulder belt. This mode is used any time a child safety seat is installed in an outboard seating position, or when a tight lap/shoulder belt fit is
desired. The ALR mode is automatically engaged when the webbing is fully extracted from the retractor. As the webbing is retracted back onto the spool,
an audible clicking sound is made, indicating that the retractor is in the ALR mode. The ALR mode is automatically disengaged when the webbing is
retracted back onto the spool. ALR mode is disengaged when the audible clicking sound ceases and the webbing is free to move in or out of the retractor,
indicating that the belt has returned to the vehicle sensitive (emergency) locking mode of operation.

Automatic Locking Retractor (ALR) Mode|Page 9570 > < Seat Belt|Specifications