Econoline E150 1/2 Ton V8-5.4L SOHC VIN L (1999)
Front Door Exterior Handle: Service and Repair
Single Latch or Sliding Door, Outside
REMOVAL
1. Remove the door trim and watershield.
2. Front door and sliding door: disconnect the outside door handle-to-latch rod from the retaining clip.
3. Right rear door: remove the license plate housing screws, and pull the housing away from the door.
4. Right side hinged and right rear door: disconnect the cable from the door handle lever.
5. All doors except sliding door: drill out the rivets, and remove the door handle.