Econoline E150 1/2 Ton V8-5.4L SOHC VIN L (1999)
1. Lubricate the brake backing plate friction points. Use Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (Motorcraft
WA-10) or an equivalent silicone compound meeting Ford specification ESE-M1C171-A.
2. Install the rear brake shoes and linings.
1. Position the rear brake shoes and linings.
2. Install the brake shoe hold-down spring pins and the brake shoe hold-down springs.
3. Install the brake shoe anchor pin guide plate.
3. NOTE: To prevent incorrect installation, the socket end of each brake adjuster screw is stamped R or L.
Assemble the brake adjuster screw assembly.
1. Apply Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (Motorcraft WA-10) or an equivalent silicone compound
meeting Ford specification ESE-M1C171-A.
2. Install the brake adjuster screw into the brake shoe adjusting screw nut to the end of the threads, and then loosen one-half turn.
3. Install the brake shoe adjusting screw socket on the brake shoe adjusting screw nut.
4. Install the brake adjuster screw assembly.
1. Position the brake adjuster screw assembly.