Econoline E150 1/2 Ton V8-5.4L SOHC VIN L (1999)
Disconnect the front parking brake cable and conduit.
1. Remove the tension limiter nut.
2. Separate the tension limiter from the equalizer.
5. Lower the vehicle.
6. Remove the LH cowl side trim panel.
7. Disconnect the electrical connector from the parking brake signal switch and bracket.
8. Remove three parking brake control nuts and separate the parking brake control from the steering column support bracket.
9. Remove the cable end retainer from the parking brake control.
10. Remove the front parking brake cable and conduit.
1. Using box wrench, compress the fingers of the parking brake cable retainer.
2. Pull the front parking brake cable and conduit from the parking brake control.
