ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Oil Pan, Engine|Specifications|Page 2390 > < Oil Pan, Engine|Specifications|Page 2388
Page 1
background image

Oil Pan: Service and Repair

Removal 

1. Disconnect the battery ground cable. 
2. Remove the engine cover. 
3. Remove the vapor management valve. 
4. Remove the Engine Air Cleaner (ACL) and the air cleaner outlet tube. 
5. Partially drain the radiator and disconnect the upper radiator hose at the radiator.
6. Remove two screws at the top of the fan shroud and position the fan shroud toward the engine.
7. Remove the throttle body. 

8. Remove the nut retaining the transmission filler tube at the rear of the RH cylinder head and position the tube aside.
9. Raise and support the vehicle. 

10. Drain the engine oil, and remove the oil filter.

11. Remove the nuts retaining the front engine support insulator to the front engine support bracket. RH shown, LH typical.

Oil Pan, Engine|Specifications|Page 2390 > < Oil Pan, Engine|Specifications|Page 2388