Econoline E150 1/2 Ton V8-5.4L SOHC VIN L (1999)
Refrigerant Pressure Sensor / Switch: Service and Repair
A/C Cycling Switch
REMOVAL
1. Disconnect the A/C cycling switch connector.
2. Remove the A/C cycling switch from the top of the suction accumulator/drier.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the O-ring seal with PAG compressor oil, Motorcraft YN-12c, F7AZ-19589-DA, or equivalent meeting Ford specification
WSH-M1C231-B.
