ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Dual Wheels|Page 1740 > < Initial Inspection and Diagnostic Overview|Page 1737
Page 1
background image

Tires: Service and Repair
Dual Wheels

Part 1

Part 2

2 Of 2

Removal

WARNING: Aftermarket wheel assemblies may not be compatible with the vehicle. Use of incompatible wheel assemblies can result in
equipment failure and possible injury. Use only approved wheel assemblies.

WARNING: Use only integral two-piece swiveling lug nuts on vehicles equipped with dual rear wheels. Do not attempt to use cone-shaped
one-piece lug nuts on these vehicles. If used, cone-shaped one-piece lug nuts can come loose in vehicle operation. Do not attempt to use past
model wheels, which have cone-shaped wheel hub bolt nut seats, on this vehicle. Do not attempt to use present design wheels and lug nuts on
past model wheel hubs. Attempted use of intermixed wheels can lead to damage to the wheel mounting system and could result in wheels
coming loose.

1. Remove the wheel cover, if so equipped.
2. CAUTION:  Do not use heat to loosen a seized lug nut. Heat can damage the wheel and wheel bearings.

NOTE:  Do not remove the lug nuts at this time.

Dual Wheels|Page 1740 > < Initial Inspection and Diagnostic Overview|Page 1737