ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Power Steering Bleeding|Service and Repair|Page 6940 > < Pitman Arm|Service and Repair|Page 6935
Page 1
background image

Power Steering Bleeding: Service and Repair

Special Tools

CAUTION:  If the air is not purged from the power steering system correctly, premature power steering pump failure could result. This
condition can occur on pre-delivery vehicles with evidence of aerated fluid on vehicles that have had steering component repairs
.

1. NOTE:  A whine heard from the power steering pump may be caused by air in the system. The power steering purge procedure must be performed

prior to any component repair for which power steering noise complaints are accompanied by evidence of aerated fluid.

Remove the reservoir cap. Check the fluid.
-

Use Motorcraft MERCON(R) Multi-Purpose ATF XT-2-QDX or MERCON equivalent.

2. Tightly insert the stopper of the vacuum pump into the reservoir.
3. Start the Vehicle.

Power Steering Bleeding|Service and Repair|Page 6940 > < Pitman Arm|Service and Repair|Page 6935