Econoline E150 1/2 Ton V8-5.4L SOHC VIN L (1999)
5. Remove the cotter pin and the lower ball joint nut. Discard the cotter pin.
6. Remove the pinch bolt and the camber adjuster.
7. CAUTION: To prevent damage to the ball joint seal and the ball joint socket, do not use a pickle fork-type remover to loosen the ball
joints.
Remove the front wheel spindle.
1. Strike the lower end of the front axle to loosen the ball joint.
2. Remove the front wheel spindle.
Installation
1. NOTE: Tighten the ball joint nut further, if necessary, in order to insert the new cotter pin.
Install the front wheel spindle in the front axle.
1. Position the front wheel spindle in the front axle.
