Econoline E150 1/2 Ton V8-5.4L SOHC VIN L (1999)
6. Using a soft-faced hammer, drive the pinion assembly out of the front bearing cone and remove it through the rear of the housing.
^
Remove the rear axle drive pinion seal.
^
Remove the rear axle drive pinion shaft oil slinger.
7. NOTE: Remove the collapsible spacer and discard it.
Use the special tool to remove the pinion bearing.
8. NOTE: Do not remove the pinion bearing cups from the housing unless the cups are damaged.
Remove the outer differential bearing cup with the special tools.
9. Remove the inner differential bearing cup with the special tools.
Installation
