Econoline E150 1/2 Ton V8-5.4L SOHC VIN L (1999)
Windshield Washer Reservoir: Service and Repair
REMOVAL
1. Raise and support the hood.
2. Remove the battery.
3. Remove the battery tray.
1. Remove the bolts.
2. Remove the battery tray.
4. Remove the washer pump and reservoir.
1. Remove the nut.
2. Remove the bolt.
3. Disconnect the filler hose.
4. Disconnect the electrical connector.
5. Detach the wiring harness locator from the washer pump and reservoir.
6. Disconnect the windshield washer hose.
7. Remove the washer pump and reservoir.
NOTE: Windshield washer fluid must be collected in a container after the windshield washer hose is disconnected.
