Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
Brake Caliper: Service and Repair
Front
Anchor Plate
Removal
1. Remove the pads.
2. Remove the front disc brake caliper anchor plate.
1. Remove the two front disc brake caliper anchor plate bolts.
2. Remove the front disc brake caliper anchor plate.
Installation
1. Install the front disc brake caliper anchor plate.
1. Position the front disc brake caliper anchor plate.
2. Install the front disc brake caliper anchor plate bolts.
2. Install the pads.
Disassembly and Assembly
DISASSEMBLY
1. Remove the disc brake caliper.
2. Drain remaining brake fluid from the disc brake caliper
3. Secure the disc brake caliper in a vise.
4. Remove the caliper pistons.
1
Place a block of wood between the caliper bridge and the caliper pistons.
2
Apply low air pressure to the fluid port in the disc brake caliper.
3
Force out the caliper pistons to the block of wood.