Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
7. Remove the speed control servo.
1. Press the locking tab in.
2. Rotate the speed control actuator cable cap and disconnect the speed control actuator cable.
3. Remove the speed control servo.
8. Detach the speed control servo from the bracket.
1. Remove the bolts.
2. Detach the speed control servo from the bracket.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
-
When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy.
The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
-
It is necessary to adjust the speed control actuator cable after the speed control servo is installed.
