Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
7. Disconnect the A/C evaporator core fitting.
1. Remove the screw.
2. Disconnect the A/C evaporator core fitting.
8. Remove the four clamps.
1. Remove the screw.
2. Remove the clamp.
9. Raise the vehicle.
10. Disconnect the underbody tube spring lock coupling.
11. Lower the vehicle.
12. Remove the condenser to evaporator tubes.
INSTALLATION
1. Service the replacement condenser to evaporator tube with the proper amount of Motorcraft YN-12c refrigerant oil or equivalent meeting Ford
specification WSH-M1C231-B.
2. Route the condenser to evaporator tube.
3. Raise the vehicle.
