Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
8. Install the compressor discharge line isolator.
1. Install the compressor discharge line isolator.
2. Install the screw.
9. Install the four clamps.
1. Install the clamp.
2. Install the screw.
10. install the engine air cleaner and the air cleaner outlet tube.
11. Fill the engine cooling system.
12. Reconnect the battery ground cable.
13. Using proper procedures, evacuate and charge the A/C system. See: Service and Repair/Evacuation and Charging
Standard A/C
REMOVAL
1. Using proper procedures, recover the refrigerant.
2. Disconnect the battery ground cable.
3. Remove the engine Air Cleaner (ACL) and the air cleaner outlet tube.
