Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
3. Replace the fluid filter and seal as required.
CAUTION: If replacing the filter, and the seal remains in the main control bore, carefully use a small screwdriver to remove the seal. Use care
not to damage the main control bore.
NOTE: If the transmission is being repaired for a contamination-related failure, use a new filter and seal. The filter may be reused if no excessive
contamination is present.
4. Position the pan magnet into the transmission fluid pan.
5. Install the transmission fluid pan and gasket.
1. Position the transmission pan gasket.
2. Position the transmission fluid pan.
NOTE: The transmission pan gasket is reusable. Clean and inspect for damage; if not damaged, reuse the gasket.
