Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
9. Disconnect the six fuel injector electrical connectors.
NOTE: One fuel injector is shown, all are similar.
10. Remove the fuel injection supply manifold.
1. Remove the bolts.
2. Remove the fuel injection supply manifold.
11. Remove the six fuel injector retaining clips and the fuel injectors. Inspect the fuel injector O-rings. Replace as required.
CAUTION: The fuel injectors are deposit-resistant.
INSTALLATION
WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR
ANY FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND CAN BE IGNITED,
RESULTING IN POSSIBLE PERSONAL INJURY.
1. Follow the removal procedure in reverse order.