Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
Throttle Cable/Linkage: Service and Repair
REMOVAL
1. Hold the accelerator pedal in place and disconnect the accelerator cable from the accelerator pedal and shaft.
2. Remove the engine Air Cleaner (ACL) and outlet tube.
3. Depress the tab and remove the accelerator control splash shield.
4. Remove the accelerator cable from the bulkhead. From inside the vehicle, compress the retaining tabs on the cable end and remove the cable from
the bulkhead.
5. Remove the accelerator cable from the throttle body cam.
