Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
Ignition Coil: Service and Repair
REMOVAL
1. Remove the air cleaner assembly.
2. Remove the engine cover.
3. Disconnect the accelerator and speed control cable (if equipped) at the throttle body.
4. Disconnect the spark plug wires.
-
Squeeze the locking tabs while twisting and pulling upward.
CAUTION: The spark plug wires must be connected to the proper ignition coil terminal. Mark spark plug wire locations before removing them.
5. Disconnect the ignition coil electrical connector and the radio ignition interference capacitor connector.
