Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
Battery Cable: Service and Repair
Primary
REMOVAL
1. Disable the vehicle electrical supply.
CAUTION: Failure to accurately follow the battery disconnect procedures will result in vehicle or component damage.
2. Disconnect the primary battery positive cable and remove the hold-down wedge and the primary battery.
3. Remove the four bolts retaining the battery tray and remove the battery tray.
4. Remove the primary battery negative cable ground nut and disengage the eyelet terminal.
5. Remove the starter motor relay B+ terminal rubber cap.
6. Remove the starter motor relay eyelet terminals.
1. Remove the B+ terminal nut and disengage the wire.
2. Remove the enable terminal nut and disengage the wire.
7. Remove the three harness locators in between the primary battery tray mounts.
