Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
Power Steering Pump: Service and Repair
Power Steering Pump
REMOVAL
1. Remove the drive belt.
2. Raise and support the vehicle.
3. Disconnect the power steering reservoir pump hose from the power steering pump.
-
Drain the power steering oil reservoir.
4. Disconnect the high-pressure fitting from the power steering pump.
5. Remove the two top power steering pump bolts.
6. Remove the lower pump bolt and remove the power steering pump.
INSTALLATION
1. Position the power steering pump and loosely install the three bolts.