Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
Tie Rod End: Service and Repair
Outer
REMOVAL
1. Raise and support the vehicle.
2. Remove the tie rod end castellated nut.
(1) Remove the cotter pin.
(2) Remove the nut.
3. Using the Pitman Arm Puller, remove the tie rod end ball stud from the front wheel spindle.
4. Remove the tie rod end.
(1) Loosen the bolts on the tie rod adjusting sleeve clamp.
(2) Count the number of turns required to remove the tie rod end from the tie rod adjusting sleeve clamp.
INSTALLATION
