Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
15. Position and zero Dial Indicator With Bracketry on the forward clutch pack.
-
Push downward on the clutch pack.
-
Release pressure and zero the dial indicator.
16. Check the clutch pack clearance.
1. Lift up on the clutch pack until it fully seats against the clutch pressure plate retainer.
2. Read the dial indicator.
-
If the clearance is not within specifications, install the correct size retaining ring.
17. Slide the two scarf-cut seals on the input shaft. (A) is correct; (B) is incorrect mating.
