Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
11. Remove the reverse clutch piston spring retaining ring.
12. Remove the (A) reverse clutch piston spring and the (B) reverse clutch piston spring pressure ring.
13. Remove the reverse clutch piston.
NOTE: To ease reverse clutch piston removal, it may be necessary to apply air pressure to the reverse clutch drum. Block the opposite hole.
14. Remove the (A) reverse clutch piston inner seal and the (B) reverse clutch piston outer seal.
ASSEMBLY
1. Inspect clutch cylinder thrust surfaces, piston bore and clutch plate serrations for scores or burrs. Minor scores or buffs may be removed with
crocus cloth. Replace clutch cylinder if badly scored or damaged.
2. Check fluid passage in clutch cylinder for obstructions. Clean out all fluid passages. Inspect clutch piston for scores and replace if necessary.
