Econoline E250 3/4 Ton V6-4.2L VIN 2 (1998)
1. Install the mounting arm and pivot shaft retaining Clip on the windshield wiper mounting arm and pivot shaft.
2. Install the windshield wiper motor.
1
Position the windshield wiper motor in the dash panel.
2
Install the bolts.
3
Connect the electrical connector.
3. Connect the windshield wiper mounting arm and pivot shaft.
1
Press upward on the windshield wiper mounting arm and pivot shaft after it is aligned with the windshield wiper motor.
2
Install the access cover in the dash panel.
4. Install the cowl top vent panels.
5. Install the windshield wiper pivot arms.