Econoline E250 3/4 Ton V8-4.6L SOHC VIN W (2000)
10. Remove the primary piston and secondary piston assembly.
11. Note: If the brake master cylinder bore is damaged, the brake master cylinder must be replaced.
Use isopropyl alcohol to clean and inspect the brake master cylinder bore for damage.
Assembly
WARNING: Brake fluid contains polyglycol, ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally,
drink water and induce vomiting. Get medical attention immediately.
1. Use clean High-Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid meeting Ford specification
ESA-M6C25-A to lubricate the new piston assembly seals.
2. Carefully install the secondary piston assembly.
